moedip,
Ignition on, ground pin 6 of x92 (the black muti pin test connector near the battery) for 3 seconds. Have someone observe the SRS light and count the flashes. Repeat procedure until the original number of flashes repeats. You may have several codes. After the first code repeats you may now begin the erasure process. Ground pin 6 for 7 seconds, wait 3 seconds and ground pin 6 for 3 seconds. The next code should then flash. Repeat again and again until 1 flash =no codes. Sounds complicated but its not after a little practice. Bibo ergo sum.

__________________
Paul