hello

it will be no problem if you get the correct mounting brackets for the euro's. likely the only problem will be the shaft location. you may have to doctor up that small panel with a new hole and fill in the other.

no one believed me when i said i did what you said. all i did was make a 4 wire jumper on the one motor and they work fine. all i did was modify the brackets with a couple of new holes and slots and they fit fine.

call phil he should be able to get the bracket part numbers so you can order them.

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!