If you put in LEDs most likely your bulb out indicator light will come on. The system knows how much of a current draw there is supposed to be. Since LEDs draw less current, the system willl think there is a bulb buned out and trigger the lamp.

I have not looked into it myself but I believe that you could install a resister somewhere to bring current back to the correct draw. Just be careful of how hot the resister gets and where it is located. If not, you could always pull the idiot light out, but that is a shortcut.

__________________
Ali Al-Chalabi

2001 CLK55
1999 Dodge Ram 2500 Cummins Diesel
2002 Harley-Davidson Fatboy
Merlin Extralight w/ Campy Record