Quote:
Originally posted by Gilly
Possibly the steering angle sensor, aka "the somethingeruther" may no be recalibrated properly. What I would try is disconnecting the negative post on the battery, then reconnect it, start the truck and then right away do the initiallization routine I described previously.
In regards to the cat, again I don't believe there is an actual hole in it, more than likely it cracked along a weld, I have seen this before, nothing to do with salt air. More than likely the truck was run on the highway and then went through a car wash with an underbody flush, or went through a puddle of water, which made a weld crack on the outer covering on the cat.
Gilly
|
Gilly, Are there other things that will need to be reset , like the radio, if I do this?