well that makes some sense. i just did the fronts on my 87. i pumped up the motive 20 plus psi and nothing came thru the wheel bleeder. i tried and tried but nothing. getting aggravated i pushed more pressure and still nothing. i even removed the bleeder center completely and nothing. so i had my wife get in and do the 123 hold still nothing. soooo..... after several attempts i told her to pump and then stomp the hell out of the pedal and if it goes to the floor too bad well finally i got a trickle of juice so i kept it up till i got new juice thru the bleeder.

the only thing i could think of was the abs unit must be doing something to the pressure or flow. i didn't know from what but the brakes work absolutely perfect. good pedal feel good height and stops great.

so i guess this action is normal???

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!