If I read the post correctly, you have the following situation;

Car engine has been taken apart and is no bask together to be started and it is out of the car.

i would first put the engine back in the car. Not sure why you would want to prime it out of the car.

Prime the engine by removing the injectors and crank the engine with no compression. It will spin like crazy. Keep doing this until you have oil pressure and the injector tubes are spurting fuel out. i usually place a towel under the injector tubes so you don't make a mess. This should not take more than a minute.

then put the injectors back in and glow for twenty seconds and crank. I have used this technique and have never drained a battery on a properly assembled engine.

henry

__________________
63 190d (sold)
69 220D (sold)
69 280SL (sold)
76 BMW 2002 (sold)
86 190E-16v (Demised at Laguna Seca Turn 9)
87 300SDL (sold)
87 300SDL 135k
87 300TD 280k (sold)
95 E320W 311k
95 E320w 180k
05 C320 4matic
06 E320 CDI 90k (Totaled by a texting 19 year old girl in a nissan)
2013 GLK 250 Bluetek 4MATIC 295k