|
Ron
You need to remove the original lighter gauge wire from the bottom of the fuse box and plug this new one into it.
I can't remember if the info is actually printed on the bottom side of the fuse box or not, but it's a blue-colored connector with a call-out number of ML/B. If you look at where fuse #44 is, just realize that ML/B is roughly underneath where this fuse is located. The wire you need to remove is more than likely the same color as on the new harness, so that may help you find it. From the lousy picture I have on the DTB, it looks like there are only 2 wires going to this connector. You should be able to simply pull the connector out of the fusebox, then the connector comes apart so you can remove the one wire you need to remove. Look on the fusebox itself for a marking that says "ML/B".
Gilly
|