DJ
Quote:
|
I noticed that there is a 7mm and 10 mm size listed for my car. Which ones should I get. I don't remember what size my old ones are and I don't want to pull one out just to see what size it is.
|
The soft shield with the 10mm hole (Pt No. 64760331) superseded all earlier shields with smaller holes about 15 years ago. It was found that the smaller holes (7mm and 5mm) did not consistently sit squarely on the nozzle face and would leak. The seating on the PC is actually spherical, as is the chamfer on the shield.
Quote:
|
There is a way to bend them back a little to provide a good sealing surface afterward.
|
Yes, you could hit it with a ball bearing and bend it back but I have seen far too many injectors packed inside with carbon and corrosion to recommend you do this to save 5 bucks perhaps once in 5 years.