I got the deluxe pads and there was no hole for the sensor wire at all in them. Also, as I've posted here before, one of the pads was built on the wrong backing plate. The taper of the compound and the notch for the caliper to fit into on the edge were not the way any pad should be built. I had to grind the lower edge of the C shaped notch off the edge of the backer plate in order to lower the caliper into place. You know how you have to put the one side of the caliper in place before the other so the notch fits in and the opposite side slides down? Was impossible with the part I was sent. Phil offered a swap, but I decided grinding was my prefered option so I could get the car on the road that day.