|
I recently installed a monovalve repair kit in my 300D. It gave full heat most of the time (but not all of the time). I removed the monovalve assembly so I could connect it to a 12 volt supply and see what it did. What I found was that the plunger was a tight fit in the bore, so it would physically stick partially open. I took it back and got another kit, now all is well. Bottom line is, you could have a simple mechanical problem like that. i's easy to take it out and test it using a battery or other 12 volt supply.
__________________
Palangi
2004 C240 Wagon 203.261 Baby Benz
2008 ML320 CDI Highway Cruiser
2006 Toyota Prius, Saving the Planet @ 48 mpg
2000 F-150, Destroying the Planet @ 20 mpg
TRUMP .......... WHITEHOUSE
HILLARY .........JAILHOUSE
BERNIE .......... NUTHOUSE
0BAMA .......... OUTHOUSE
|