Quote:
Originally posted by psfred
Check by removing the injector -- ball pin should be visible as a sphere held in place by two small extensions on the sides sitting directly under the hole in the prechamber.
|
Is there any "trick" to seeing the visible ball pin through the hole left after the injector is removed? Or, is it a matter of having a top quality flashlight and 20/20 vision, and I didn't
My experience from about a month ago was that I couldn't tell much of anything when I looked for the ball pin. I
Also, when you say the small extension from the sides holding the ball pin, is that talking a left-right orientation, or an up and down orientation?