My readings were with a faulty O2 sensor, so they're pretty useless as far as I can tell. Also, they are in GPM, so not sure how to use that.

HC=6.81 (limit 2.0)
CO=279.1 (limit 30.0, says "composite")
CO2=418.1 (not judged, just measured)

However, I bought the car from a guy in FL, and have four years of his records. Readings from FL are direct and I think at idle.

HC=36, 66, 79, 133 (limit 220PPM)
CO=.01, .00, .07, 1.19 (limit 1.2%)
CO2=14.4, 14.1, 14.4, 14.3 (no limit %)

Listed readings are respective (e.g. 36, .01, 14.4 was on set). If I knew what the GPM readings corresponded to in % then I could at least figure out if I'm in the ballpark.