I basically checked the power inputs and ground at the soft top controller module and they're all good. I have acess to an AST scan tool, I tried to retrieve codes from the soft top module controller and it gives me an error, I can retrieve codes for all other modules like the engine and do a base module check with the scan tool, but when I go to access the soft top control module it repeatedly gives me this error. "Is ignition on?" since this is the only module that won't talk to the code retriever and I've checked the inputs from the limit switches at the controller plug itself with continuity on all but two switches, and continuity for both positions on the soft top up/down button and the rollbar manual up/down switches. The soft top control module is starting to look like the culprit, the only switches I haven't got continuity for are the top overhead switch and the roof up switch, I think that's what they're called. Those seemingly would be made with the top up. I'm not too sure though, I was told that hard codes would possibly cause a situation where the soft top control module would go into a "default" mode where it would do nothing. I'm not sure though, as I cannot pull codes. I'll let you know what I find. Until then...
Regards,
Tee

__________________
I'm here to learn...