Thread: tranny & oil cooler lines
View Single Post
  #2  
Old 02-04-2001, 09:08 PM
Benzmac Benzmac is offline
Registered User
  
Join Date: Mar 1999
Location: Suwanee, GA, USA
Posts: 4,712
You will not need specail tools. You will need a 17mm and a 19mm open end wrench.

All you do is swap the parts and then top off the fluid. The proper level is 10mm below the bottom line on the dipstick in park on a level surface when cold.
__________________
Benzmac:
Donnie Drummonds
ASE CERTIFIED MASTER AUTO TECHNICIAN
MERCEDES SPECIALIST 11 YRS
Reply With Quote