After thinking about it I was wondering why the good folks at MB made something so simple so hard. I added Electric Windows to my 98 Jeep Wrangler and a new regulator to my 67 Ford Galaxie so I figured this would be much easier.

I bought a stainless 1" Hex Head bolt, two washers and a Nylock Nut.

Drilled the existing stud out of the regulator, cleaned up the shavings and attached the slide and snugged up the nut enough to keep out the slack.

I removed the nut and two bolts, slid the regulator up a few inches pushed the window down go the slide in place and then pushed the regulator back in position attached the nut and two bolts, used some white lithium grease and the window worked great. Put the door panel back together and checked the watch, it took me total of 45 minutes from start to finish.

If for some reason it does not hold up I am only out $9 and some time but I don't see why it won't work.

James