Quote:
Originally posted by DANTRCAV
You didn't say where you got your Webers. If you got them from JAM then they will have the correct jetting for your setup.
|
They are from JAM. I'm going to check the linkage again .. I had trouble making room for it.. for example the cooling hose that runs under the carbs is totally in the way and the accerator arms barely miss it. The angle that the linkage comes at the carbs seemed off when I was installing but there didn't appear to be much to do about it. I'm pretty sure I didn't overtighten the nuts on the arms.. they aren't binding there.
Your 71 250c should not have been much different than mine in this regard.. did you have any problems installing the linkage?