"Test on/off ratio at 2500 rpm and take average reading. Compare this reading with the idle speed, adjust if necessary. The average reading at idle speed must not vary by more than +/- 10 from the reading measured at 2500 rpm."

this is in footnote 2 in section 07.3-105 page 1 of the section.

the way I read this it does not matter if it is at 5 or 40 or 40 or 70 as long as it does not vary by more than 10.

Maybe reading this manual wrong?

thanks again.

other info: new [rebuilt] ignition distributor, new cap, new rotor, new plugs, new wires [Bosch].

Appreciate the info.

__________________
dloveless

1984 500 SEL [131K]-
1991 GMC Sierra 4X4 XC [162K]- War Pony.
2004 Jeep Liberty Limited [8k]- wife's sled- Belle.