Quote:
Originally posted by Duke2.6
I don't understand what you're saying. Previously you stated that you checked both the microswitch and TVS, and the test results you posted indicated they were functioning properly.
Do you mean that the problem was at one of the wire connectors to the microswitch?
Feedback is important on this issue because idle problems are common, and the "things to check" responses are all over the map.
Duke
|
Yes you understood me correctly. And pardon my english. But it was the CONTACT of the wire connections at the microswitch that I eventually found to be bad. I cleaned the wire connections and with a little force I made the contacts narrower so that they would not loose contact again. The switch itself was ok, and while testing it the first time I never noticed that it was bad contact at the connctors. I guess you understand now(?) :-)