Hey everyone,

I have a 1987 190E 16V euro model. I need to replace some rear links on the rear end. Specifically the Pulling strut, Camber strut and the Pushing strut. I have never done something as advanced as this so I want to make sure I know what I am getting into.

I have the shop manual (blue and white book) and it does not seem that I need to remove the rear disk or backing flange thing. Is that correct? Seems like it would be a lot easer to get to some of the bolts but not sure if it is worth the hassle?

Is there anything that is under load that when I loosen something it will take my head off? Wife said she has no intention of cleaning up the mess.

The dealer want to sell me new bolts part # 201-350-45-06. 1 set for each strut. Do these wear out? I saw in the manual that they use self locking bolts but can’t I use thread lock?

According to the manual, I know I have to have the rear axle horizontal. Anything else I need to know about? Time is not to critical as I have a second car to get about in.

Also, will I have to get the rear end realigned?

Anything you guys can add would be great.

Thanks

David

__________________
Sent from an agnostic abacus

2014 C250 21,XXX my new DD ** 2013 GLK 350 18,000 Wife's new DD**

- With out god, life is everything.
- God is an ever receding pocket of scientific ignorance that's getting smaller and smaller as time moves on..." Neil DeGrasse Tyson
- You can pray for me, I'll think for you.
- When you understand why you dismiss all the other possible gods, you will understand why I dismiss yours.