First off, I would like to know if the 87 260E had a different suspension setup than an 87 300E. the reason I ask is because I've seen most 260E's sitting higher off the ground with a lot more room between the tire and the body than any other 300E's.
Now if the suspension was wearing out I would suspect the car to sit lower not higher above the ground.
anyhow, I dont want to install aftermarket performance shocks or springs because I want to keep the soft ride. at the same time I also don't want almost a 3/4 of a foot distance in the tire well.
Any ideas how to lower it to 300E spec. and at the same time could someone please post the factory specs as to what the distance between the tires and the fenders should be .
thnx.

__________________
Whether you think you can or cannot, Either way you're right!. by Henry Ford.