Quote:
Originally posted by BrierS
I have an W124 '87 300TD. You mentioned putting this on different cars. Would it work the same way on my particular car (not familiar with 617/603 differences). Thanks. Steve
|
Looked at this TD yesterday (while replacing the H2O pump, thermo, clutch, etc.) and it looks too tight to reasonably mount this kit unless you tapped into the plenum right at the top where the line snakes around from the bottom. Since I have not installed this on a 124, I can't say it'll work, so I'd suggest experiment with it yourself (hook up a pressure gauge to the intake and then clamp that line off with vice grips and rev it, see what the pressure is with and without the clamp.