Im still struggling with this c-clip. I wasnt comfortable leaving it without the spacer installed, so i put the spacer back on. With the spacer installed, the c-clip groove is visible, but just not enough to get the clip in the groove. So, this time with the spacer installed, I put the other end of the axle in the hub and used a brass drift and hammer to see if I could pound it in...... Guess what? No luck.
Quote:
Originally posted by Lycoming-8
Local Indie has indicated [...] If required, install thicker or thinner spacing ring."
|
This may be the next step. Any idea where to get a spacer ring?