Sounds like sliding pins will be my project for the weekend.
I got the PBR Deluxe pads because I have heard nothing but good things about them in various threads here. My main objecdtive is adequate stopping power and low/no dust.
I had MetalMasters which had great stopping power, and were not too hard on the rotors, but dusted as much as OEM pads (except with a brownish/rust color that also stained the wheels).
I bought the Brembos with the MetalMasters in mind, but chose the Deluxe at the last moment. Also, at $37 each, they were the same or less than OEM rotors.
I am currently searching "sliding pins" here and via Google. ANy warnings I should be aware of, or is it an easy job?