Steve,
Quote:
|
The chain is half in, half out, its dark now so it'll have to wait till the morning.
|
So you'll complete it tomorrow!
Quote:
|
Complete threading new chain through. Set crank to TDC, rotor pointing at notch in distributor. Install cams so the 2 dots face each other. install top guide rail. connect ends of chain together. install tension.
|
so far: nearly perfect.
It's not the notch the rotor should point to, its the small line in the lower left of the ring (where the notch is in). Are you with me?
Just put the cap back on and look for the position of the no. one spark lead. The rotor should point in that direction.
exactly!
Quote:
TDC for the crank is down there somewhere? what about the mark in the case to line up with, where is that?
|
I can't see the pin on the chain case
should be behind that cable for the magnetic coupling...
read you tomorrow!
bis denn,
Christian
1989 300TE
1984 2.3-16