C280 - New bearing - pulls to the left now
I replaced the front drivers side bearings - inner/outer/seal
Used ~60 grams of synthetic grease
Erred on the loose side - Made sure not to overtighten them.
Now the car pulls some to the left - i.e. after taking you hand off the wheel going 50 or so - about 4 seconds it starts to wonder left.
The bearings seem happy - No smell from the hub like burnt greese or anything
No grease leaking out.
Both rims by the hub feel as hot as each other after going 80 mph.
No hum/whine/vibes from 0-85mph
Now I'm wondering if I'm just being to paranoid and the car maybe did this before.
Or is this normal?
Thanks,
Chad.
96 C280 sport
|