Found what looks to be a broken plastic vacuum fitting near the temperature sensor for the fan clutch. red platic with two pipes coming out (1¼ now ) with rubber connections leading to other plastic tubes. One of the tubes busted near the base. Any ideas on what the name of this part is so I can order a replacement? One pipe is vertical and the other not quite vertical, but angled slightly. ( _||_//_ )

Part could have been/probably was damaged when I replaced the sensor for the electromagnetic clutch which is on the same assembly about 2 inches or less away from it.

Wondering if this could be affecting the brakes since they began acting up shortly after the sensor was replaced.

TIA as always.

Patrick