View Single Post
  #5  
Old 08-31-2004, 12:33 PM
Arthur Dalton Arthur Dalton is offline
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Quote:
Originally Posted by Arthur Dalton
That info came from the 124 CD..
I will recheck it ...
Have rechecked schematic for ignition power distribution pin pattern for chassis 124.030.
Findings are that the previous info posting is correct..
Of particular interest will be pin 50/violet wires [ 2]. These are the starter circuit feed and will only power when key is in the start position.
I would suspect either crossed/shorted wires , incorrect pin location, or bad ignition switch..
Try the above and if that does not result in remedy, I will try to get the schematic to you............
PS .. I also note that you have a gn wire to feed dash lamp circuit, whereas the CD states this wire to be gn/w.......????????
Reply With Quote