OK, am usually the one with the answers, but this has me stumped so far.

Had the mast cyl off, was to rebuild, but just ended up cleaning, replacing the rear seal and reassembling.

Also did both side brake pads and sensors on one side.

Now, when ignition is on, the brake lights are on. Continuously. Brake pedal is fine (bled brakes, no air that is noticeable, stiff pedal, brakes work fine, etc.) no wiring that I messed with to speak of.

Anyone else had this?

Maybe just coincidental that the brake light switch went bad at the same time? Lucas components snuck in un-noticed?

__________________
1984 300D Turbo - 4-speed manual conversion, mid-level resto

1983 300D - parts car

1979 300TD Auto - Parts car.

1985 300D Auto - Wrecked/Parts.


=========================

"If you don't know where you are going, any road will get you there". Lewis Carrol