I did the clear procedure and now have only the following codes
on pin 8 code 13, 22, 23.

I tried the clear procedure a number of times.
Might I be doing something incorrectly.
The first time I went to a long 8 count for each one then did
the 10 sec off followed by 10 sec on followed by a start and run
2 minutes.

THEN I did it with longer than 8 count (probably 12-14 secs)
followed by the 10 sec off and 10 sec on and then a start and run
for a couple of minutes.
THen off, turned ignition back on, plugged tool back in and checked and
have the 13, 22, and 23 code.

jsb: