Did this Cure your no start at times / stalling ?

Thanks

ANOTHER couple notes:

A 3/8" Drive E8 socket will not have enough clearance.
I went to 3 auto stores and 2 Hardware stores no luck.
My New CPS arrived today - and I got lucky at NAPA and bought a 1/4" drive E8 socket for $3.
Then it snowballs.... I trusted the Parts guy online to send me the correct sensor using my VIN Number. At 1st glance it looked great until iI installed it.
The elect connector was wrong. My 1999 ML320 has a 0 261 210 141
aparently their book read 0 261 210 171.
I will update later weather or not they will take the sensor back.
My parts guy said he'd take the sensor back. Note electric connection guides in Picture. Mine is 180 degrees from bolt , replacement was 90 degrees. --wont let me duplicate my picture can be found searching " more crankshaft position sensor questions "

__________________
Steve Danville
what i did myself.
CPS
rear shocks
MAS x 3.
SparkPlugs (twice)
Fuel pump & Filter
Window switch
replaced both failed horns with Honda horns.
Cleaned ERG Tube
Oil changes
Oil consumption Fix
Brake Pads
A/C Recharge
Anti-Freeze change X 2.
Front Shocks. Monroe. $90
Mercedes Warrenty Work:
Harmonic balancer,power steering clamp. Cat converters.Drive Shaft Bearing.s
Replaced Outer Lower Tie Rods and front lower ball joints at 156,000 miles