|
On the 190E to test you just push the button and see if it goes to Zero Ohms on a Bolt/Ohm Meter! And is open when not depressed! If it tests fine then we move to the kickdown solenoid on the tranny. In which there should be 12V when the switched is depressed. On mine it was one wire going to the solenoid. I got a new solenoid only to realize that the wire was broken in the connector. So I pulled the connector apart and resoldered the wire and walla it now functions as designed. Also make sure there is 12V on one of the wires at the switch as well.
__________________
~Jamie
_________________
2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's.
1986 190E 2.3 Black, Auto, Mods to come soon.....
|