|
Just wanted to give everyone a follow up ...
The collar with the Autozone tool works perfect. Tightened it up and 2 swings with a hammer- it pops about 1/2 out. Did it again and it's in my hand. You could easily do this on the car....
Flipped the collar over on the top of the control arm, and pressed the new joint in place.
Just make sure you have everything square and it's easy.
Michael
__________________
Michael McGuire
83 300d
01 vw A4 TDI
66 Chevy Corsa
68 GMC V6 w/oD
86 300E
|