|
Oh Man, have I been HERE before!
BIG hits with the rubber mallet, you won't damage it (believe me, if a rubber mallet will harm it, I would have harmed one by now). BEAT on that sucker and that may work.
Alternatively I have used a chisel, medium size one, right where the bottom of the gasket meets the head. Put it in at a very shallow (flat) angle. Tap it in there little by little, you'll eventually pry it off that way. I usually do this at the right front corner.
I assume you have the plug wires removed already and the conduit removed from the valve cover.
Gilly
|