View Single Post
  #2  
Old 10-13-2004, 01:40 PM
dmorrison's Avatar
dmorrison dmorrison is offline
Registered User
 
Join Date: Dec 2002
Location: Colleyville, Texas
Posts: 2,695
Remove the center console wood trim. Then on the drivers side of the shift unit you will see a wire going into the shift assembly. Pull out this light bulb holder and replace the bulb.

Removing the wood trim.
1. Remove the ashtray. open it and push down on the metal tab in the center rear of the ashtray.
2. remove the 2 screws you see in the ashtray opening.
3. Remove the metal bracket that the 2 screws were holding.
4. Disconnect the wire attached to the bracket.
5. Slide the wood trim towards the rear of the car about 3/4" while at the same time
6. pull up on the front of the wood trim to just barely clear the shifter, shift lever in "Drive".
7. IMPORTANT on the back of the wood trim is a 1 inch horizontal peg that holds the trim peice in the car. Don't break it, or you have to replace it and it is not available by itself.
8. Disconnect the wires from the switches and place the wood trim to the side.
9. replace the shifter bulb.
10. assemble in reverse order.

Dave
__________________
1970 220D, owned 1980-1990
1980 240D, owned 1990-1992
1982 300TD, owned 1992-1993
1986 300SDL, owned 1993-2004
1999 E300, owned 1999-2003
1982 300TD, 213,880mi, owned since Nov 18, 1991- Aug 4, 2010 SOLD
1988 560SL, 100,000mi, owned since 1995
1965 Mustang Fastback Mileage Unknown(My sons)
1983 240D, 176,000mi (My daughers) owned since 2004
2007 Honda Accord EX-L I4 auto, the new daily driver
1985 300D 264,000mi Son's new daily driver.(sold)
2008 Hyundai Tiberon. Daughters new car

Last edited by dmorrison; 10-14-2004 at 11:34 AM.
Reply With Quote