I got a little time to work on the car. I have the AC bracket off I am not putting it back on I have no bolts for the water pump I will have to get some that fit without the AC bracket from the junk yard. The thermostat housing is off. Should I remove the entire chain tensioner 2 bolts or just the big bolt with the spring and part that pushes against the chain? I will mark the chain and cam shaft sprocket so I can put them back the way they were if need be. With the timing off as described in this thread if I put the crank at TDS then rotate the cam with out moving the chain till the cam shaft marks line up is that going to give me the desired result or will it just put the valves into the pistons?
Thanks in advanse Dave S