Hey all, I just encountered my first problem with my new/used 95 SL500. When I was at the dealer I had them remove the hard top and show me the soft top worked etc. But now a week later I went to remove the hard top and it will not release. Further my auto didn't have the owners manual so I am kinda stuck in that I don't know the proper procedure and may also not know enough to know that I have a mechanical issue. Below is the outline of the procedure I followed.
1. Start Car, lower windows and set emergency brake.
2. Push red button forward - here the lift cylinders etc moving but top doesn't release.
3. Pulled red button backward but red light flashes, no mechanical sounds.
4. When red button forward the rear deck tries to lift, then it pulls the top down tight.
Through out entire process the top never "popped up" like it did at the dealership, so my thoughts are either I am missing a step with the releasing of the top, or something isn't working correctly.
Finally if my steps above were correct then is there a manual way to remove the Hard Top without tearing up the car? Thanks in advance and as always I appreciate all of the feedback and insight.
Sincerely
Phil
