You can replace well over half of the parts you ordered with 2 hands and simple tools, simply by removing and replacing....Shocks, idler arm, tie rod ends, calipers, pads, rotors and more can be done with your 2 hands and no fancy tools...when installing any type of tie rod end just measure overall length, write it down and replace with new part adjusting to your measurement...First I would adjust the steering box...you will need a allen wrench and either a socket or open/box end wrench...loosen the nut and adjust the allen head counterclockwise(this tightens the steering) about 2 turns and then tighten nut and test drive...if necessary adjust clockwise to loosen or counterclockwise to tighten...Jim

__________________
James A. Harris