well i keep a box of almost every size of metric screws and bolts [hex head cap screws HHCS]. i can get them because i buy from an industrial fastener company. when ever i work on the 72 especially i replace all the screws and bolts i come across with SS.

look for an industrial type Fastener company. they have access to this stuff. you can also order over the internet at McMaster Carr. they are in chicago, il area code is 630. sorry i'm not at work or i could give you their number.

my local guy is Sanders Indiana Hardware. 219-465-4090 ask for debbie and tell her that craig sent you. i'm sure you'll have to prepay or go cod but i'd bet you she can help.

good luck

__________________
Thanks Much!
Craig

1972 350sl Red/Blk 117k
1988 420sel charcoal/Blk 140k
1987 420sel gold/tan 128k
See My Cars at:http://mysite.verizon.net/res0aytj/index.html

Pound it to fit then Paint it to match!

There is only First Place and Varying degrees of last!

Old age and deceit will overcome Youth and Enthusiasm every time!

Putting the square peg in the round hole is not hard... IF you do it fast enough!

Old enough to know better but stupid enough to do it anyway!