The back seat will need to come out(easy to do and the electric connectors will just unplug) so that you can unbolt the shocks...I am going to offer suggestions and maybe others can fine hone my suggestions. You will need to open and drain the fluid from the lines to the shocks...use a couple coffe cans to let the system drip into. Disconnect the top of the shocks, jack up the car using the differential and place a couple jack stands for safety under the car. Disconnect the sway bar on either side. Let the car down and jack up the body and let the suspension hang down as far as it will and then check and see if the old springs will just fall out..This is as far as I have been as on the earlier 126's the springs will fall out or I have pulled them out with very little effort....Good Luck Jim

__________________
James A. Harris