Thread: Code 20: Vehicle Speed Signal Not Present
View Single Post
  #13  
Old 11-08-2004, 10:34 PM
Arthur Dalton Arthur Dalton is offline
Registered User
  
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Brake light sw is a 4 terminal, dual seperate circuit, dual contactor set sw. Brake lamp activation /illumination does not eliminate a bad BL switch diagnosis.
Code 5 on Pin 14 [ EA/CC module ] is "Brake Lamp Switch"
I believe the other codes are in the archieves ...

Single flash on pin #8 [ HFM/SFI module ] is "No Codes Stored"
Single falsh on ANY module is NCS...
Last edited by Arthur Dalton; 11-08-2004 at 11:00 PM.
Reply With Quote