|
It doen't have a true function other than connecting the hoses together, so technically you are OK with what you did, just use a piece of vacuum hose, as long as it seals tight you are OK. I assume MB thought this was a better way to join the 2 hoses together. Usually you can use I believe it's a 6mm open end wrench to pry the vacuum lines apart if you need to disconnect the hoses. This is a similar design to what they use on the PSE pump and so forth (this is a control module though), this just looks different because it's kind of out there "floating" joining this line together.
Gilly
|