Thread: Power windows slow down, seem "tight" in the middle.
View Single Post
  #12  
Old 11-20-2004, 06:52 PM
Kyle Blackmore's Avatar
Kyle Blackmore Kyle Blackmore is offline
Mostly Harmless
  
Join Date: Sep 2001
Location: almost beyond Hope...B.C.
Posts: 971
I'm experiencing the same problem with the driver's side front window on my 300CE . I've replaced the regulator (over 2 years ago) and at that time the window was working great. I sprayed white lithium grease on the slides a few monthes ago and all was good till a couple of weeks ago.I've removed the door panel again and everything seems OK , it just slows about halfway up and then seems to bind (on what I can't tell)and won't close completely. Fore /aft adjustment seems great , lateral adjustment seems to be correct , the manual says to loosen everything and start from there , I'm not sure if I want to do that as I remember what a finicky procedure it was. Any suggestions ? TIA
__________________
Democracy dies in darkness, you have to kick at the darkness till it bleeds daylight
Reply With Quote