Kamil, allow that i'am wrong only about 1/2 the time. Suspect by your dollar cost you are talking about clutch and pressure plate plus throwout bearing as well. I live back in the back woods compared to your region. Even we have access to a good clutch rebuilder and costs here are 50.00 canadian or 40.00 american to resurface clutch disk with new material and believe they rebuild pressure plates as well but do not know cost at present. First I would check for clutch rebuilder in your area with good reputation and go that way but then again that may not be your way. Also they may have access to new parts at a quite reasonable price or one could reline clutch disk and buy new pressure plate. You are in control. Remember to have the flywheel surface ground as these babys we own have a few miles on them but it is a good habit even on lower milage vehicles. Try looking up clutch guys on net or yellow pages and check them out. Oh yes, clutch rebuilder wil have ability to grind flywheels at his site and even may be cheaper as that is their regular type of work. Then the difference between suppliers price becomes irrelevant. Consider sending me the savings After all it's close to christmastime.