Thanks for the reply Ozz,
1.
Quote:
|
check the part number on the IFZ module it must be 210 820 32 26 or greater such as 210 820 32 27.
|
1.1 My old IFZ part number was 210 820 21 26
1.2 The existing one is 210 820 62 26
1.3 I do not know what is the part number on the next one that is being manufactured and eventually shipped here.
2.
Quote:
|
looking at your test printout you have CAN: no reception from IFZ. this can be caused by three problems A; faulty IFZ control module B: faulty transponder coil (serves as the data link between the key and IFZ module) C: faulty key.
|
A) Faulty IFZ Control Module -
There's a possibility it could be faulty (again)
B) Faulty Transponder coil -
Something new to my knowledge
C) Faulty key -
This suspicion can be eliminated, I have 3 keys and a 4th one coming soon.
2.1 What about the printout
CAN: TRANSM. From HFM N3/4 Faulty
Do you know what this means? Or is it a common printout whenever there is a fault caused other components?
Sincerely thanking you for your comments.