Hi All

I was trying to identify my FI system. Car is 1992 124 with 2 litre 102 engine (Euro). It has a pressure actuator on the distributor (EHA) but no O2 sensor. Also it has no pin 3 on X11 connector.

I just adjusted the EHA with the recommended 1/4 CW turn and it felt better. I've been having starting problems when the car is warm (not hot) - fires and dies immediately on the first try. Subsequently starts fine. I am hoping the EHA adjust above with cure this.

What other functions does the EHA do if there is no O2 input? I cannot get a reading from the EHA with KonEoff. But car won't start with EHA disconnected.

Thanks your input in helping me understand my system.

Oreo

__________________
1992 124 E200 (Euro)