If you are not satisfied with Euro code headlights then you either have a wrong bulb or they are not properly adjusted. The generic bulb type is H4 55/60 watt. I'm not sure what a 9003LL is.

The low beam cutoff is horizonatal on the left with a 15 degree rise on the right. Proper adjustment places the horizontal cutoff 3" below the center of the lens at a distance of 25', and the intersection between the horizontal and 15 degree cutoffs should be dead center ahead of the lamp.

The best way to adjust is to find a LEVEL surface with a wall. Place the front of the car 25' away from the wall, make the measurements and place pieces of tape on the wall 3" below the vertical lamp center distance from the ground as your targets. Adjust the lateral aim first, then the vertical.

The foglights can be adjusted in the same way. IIRC they only have a vertical adjustment because the beam is very wide with a horizontal cutoff all the way across.

Duke