Mikey: Well, I was "close", in a sense, it is adjustable plus or minus 3MM, not degrees. MB also states this in terms of MINUTES, 3MM equals 20'. According to the info I have, 10' equals .6 degrees, so the "Final Answer" is the adjustability of the front camber is plus or minus 1.2 degrees. Ain't figuring out MB front geometry FUN? The part number for the front camber adjustment bolt kit is 202-330-01-18, retail price where I work is about 6 bucks, you'll need one for each side. The rear is adjustable for toe-in only on a 210, at least per MB.....Gilly