On the OM606 engine there is an alignment hole in the camshaft gear that aligns with a hole in the front cam bearing. At TDC you should be able to install an alignment pin thru the bearing into the cam gear. IF it is MORE than 3deg off a new chain is in order!

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator