View Single Post
  #4  
Old 02-02-2005, 06:24 PM
84300DT's Avatar
84300DT 84300DT is offline
Senior Member
 
Join Date: Jan 2002
Location: Mass.
Posts: 2,219
Quote:
Originally Posted by MBwD
Hi all, I'm about to put in a new air filter, but I'm hesitant because I know that soon after it's just going to get completely soaked with oil. Is there anything that can be done to prevent this from occurring? The oil is coming from the black tube that's attached to the top of the valve cover. Is it a separator issue? The car is otherwise healthy, starts and runs fine.

Speaking of oil, I just recently noticed a leak from the cover of the oil filter housing. Oil pressure is fine, so does this just seem like an old, dried-out rubber gasket from the cover? I'm scheduled for an oil filter change as well. . .
a pic is worth a thousand words if you can get a shot of the air filter housing when you remove the cover, and a pic of the old filter.

oil filter housing , is the leak coming from the top or the engine side?

it would also help a lot to know your general location .. so to ascertain current ambient temp. etc.. and mileage on the car/engine
__________________
1984 300D Turbo - 231k....totalled 11/30/07 RIP
Reply With Quote