DO NOT INTRODUCE SOLVENT INTO THE BEARING AREA ! The solvent cleans well but also breaks down the grease and any residue left behind will break down the new grease and liquify the grease and possibly cause failure. When doing brakes, if your rotors are not warped and in specs i would not change them, get some Brakecleen spray and clean it all up, replace the pads and sensors and make sure to torque everything and re-fill the brake fluid and your good to go/stop.

__________________
Jerry

2004 SL500 Black 55K Miles
2002 s500 Black 90K Miles
1986 300E Gold 233K Miles
1966 Twin Cessna 320D
1989 Jeep Cherokee 233K Miles
1994 Ford Van E150 399K Miles